Click on each photo for enlarged view
This is a Franz Swaty barber hone that was made in Austria. This Swaty hone appears to be unused or so close to it it can't be determined. Except for a tiny chip on one corner this hone is in completely blemish and defect free condition. There are no other chips, dings or cracks, etc., This chip is inconsequential, does not hamper in anyway the use of this hone. This chip can be viewed on the right corner of photo number 5, and on the left corner of photo number 6. Except for this corner ding this hone has sharp corners on all 7 other corners, and sharp edges on all 8 edges. Swaty's were and still are thought of as the ultimate, vintage, straight razor, barber hones. This is a standard size Swaty hone that measures 5 - 1/4" long by 2" wide by 1/2" thick. It is recommended that barber hones, such as this hone, be used dry, with water or lather. Oil can be used, but is not recommended because oil penetrates into the stone and stays in the stone, and thereafter does not mix well with water or lather. If oil is used it is best to always use oil. The use of a barber hone such as this one is a honing method that constantly maintains a razor's sharpness by keeping a razor sharp all the time, instead of waiting for a razor to become dull and thus requiring a complete honing. With this method you simply hone 10 to 16 strokes (5 to 8 strokes on each side) about every 2 or 3 shaves. The use of a barber hone is easily held in one hand while honing with the other. This mnethod and use of barber hones is what was used in the straight razor era to maintain a razor's edge when today's fast cutting stones were not available. Quick, easy and simple! While Swaty's are still available, it is very hard to find a Swaty hone in this fine "one ding"condition.